Helpful Advice When Designing Your Trade Show Display Graphics
These are basic file set-up guidelines to ensure successful submission and printing of your files for Lambda output. Further below we list specific examples for size and DPI (dots per inch) to help when designing your graphics
- It is mandatory you set up files at 1/4 scale (see below). Be sure to add 1/2” bleed on all sides. (Both sides and top and bottom)
- Graphics at final size should be 100dpi. This means if you are delivering artwork at 1/4 scale it will need to be 400dpi, so when enlarged 4 times it will be 100dpi to the final size. (This includes ALL photography and computer generated artwork to be displayed on your trade show exhibit.)
- All type should be vector artwork for best quality.
- If PMS (Pantone) Match is required please send vector file or layered PSD (Photoshop Document) file and indicate PMS (Pantone) color matches on hard copy.
- Save raster files larger than 12000 pixels in any direction as .eps files.
- Use raster .eps files for images with clipping paths, NOT tiff files.
- Include all linked images and used fonts.
- For 20-foot trade show display graphics, DO NOT send via FTP. Please send on CD or DVD.
- Please download this PDF with these guidelines and a checklist
This applies to the Conventioneer, type SD Display.
All panel illustrations can be seen on the Panel Sizes Page.
10-foot Trade Show Displays
This applies to the following display: Supreme trade show display.
These size measurements are for the "SS" displays. "A" display measurements are variable, please call 1-888-547-0377 for exact specifications. "E" display measurements are 89 1/2" H x 27 5/8" for the front panels and 89 1/2" H x 23" W for the end caps. All panel illustrations can be seen on the Panel Sizes Page.
NOTE: When designing graphics, please refer to your invoice for either a "SS", "A","E" or "SD" designation. If you do not see a designation on your invoice please call 1-888-547-0377 for the correct designation.
10-foot Serpentine Trade Show Display
This applies to the Promoter type "SS" trade show display.
NOTE: When designing graphics, please refer to your invoice for either a "SS", "A","E" or "SD" designation. If you do not see a designation on your invoice please call 1-888-547-0377 for the correct designation.
10-foot Straightwall Trade Show Display
This applies to the Straight Wall type "SS" trade show display.
NOTE: When designing graphics, please refer to your invoice for either a "SS", "A","E" or "SD" designation. If you do not see a designation on your invoice please call 1-888-547-0377 for the correct designation.
20-foot Gullwing Trade Show Displays
This applies to the following displays: Expander, Excelsior and the Elite type "SS" trade show display. When designing mural for the 20-foot displays you do not necessarily need to design graphics for the endcaps.
NOTE: When designing graphics, please refer to your invoice for either a "SS", "A","E" or "SD" designation. If you do not see a designation on your invoice please call 1-888-547-0377 for the correct designation.
20-foot Serpentine Trade Show Displays
This applies to the following displays: Expander, Excelsior and the Elite type "SS" trade show display. When designing mural for the 20-foot displays you do not necessarily need to design graphics for the endcaps.
NOTE: When designing graphics, please refer to your invoice for either a "SS", "A" or "E" designation. If you do not see a designation on your invoice please call 1-888-547-0377 for the correct designation.
